Hind Proof No-1 is a semi-paste, waterproofing compound which is used as an additive in cement concrete and plastering, bearing IS Certification Mark IS 2645-2003.

Hind Proof No-2 is an extra fast setting waterproofing/plugging compound. It is a pink coloured liquid.

A multipurpose cement mortar & concrete additive in liquid form when added to concrete, results in quick setting or rapid hardening of the same.

It is fast setting powdered compound for stopping running water.

A modified ligno-sulphonate based, general purpose integral waterproofing admixture cum water reducing plasticiser for concrete, mortar and shotcrete mixes, bearing IS Certification Mark IS:2645-2003. It also conforms to IS: 9103-1999.

Hind Plast Super is a Sulphonate Naphthalene Formaldehyde based, High range water reducer cum slump retainer cum retarding plasticizer com water proofing admixture specially suitable for concreting for all climates, bearing IS Certification Mark IS 9103-1999 and also conforms to ASTM C 494 type F and IS-2645.

Hind Plast Super-RP is a very effective admixture for concrete, based on modified Sulphonate naphthalene formaldehyde, conforms to IS: 9103: 1999 and ASTM C 494 Type F.

Hind Plast Super-WRA is a Sulphonate Naphthalene Formaldehyde based, High range water reducer conforming to ASTM C 494. Type F & IS 9103.

Hind Plast-MMF is a modified polycondensate of melamine and formaldehyde based brown liquid, which gets dispersed immediately in concrete mix together with water. It conforms to IS: 9103:1999 and ASTM C-494, Type F.

Hind Plast-AEP is a slight alkaline solution, mixable with water, and having specific gravity of 1.02. It is an air entraining agent based on selected resin, conforming to ASTM-C 260-66T & IS: 9103-1999.

Hind Plast AEA is an air entraining concrete admixture. It produces a high number of correctly sized and evenly distributed air bubbles into the mix. Complies with ASTM C 260 and IS 9103-1999.

Hind Plast Super-A is pale brown coloured liquid, totally free from chloride.

Hind Plast Super - PQC is a sulphonated naphthalene formaldehyde based, High range water reducer cum slump retainer cum retarding plasticiser specially suitable for concreting for hot climate conforming to IS:9103-1999 and ASTM C494 type F.

HIND PLAST SCA is a third generation Super Plasticiser for concrete based on a unique carboxylic ether Polymer with long lateral chains. It is greatly helpful for cement dispersion. HIND PLAST SCA combines the properties of water reduction and workability retentions. It is also helpful for the production of high performance concrete with high workability. It meets the requirements for Super Plasticisers as per IS: 9103 – 2000.

Hind Plast Super-R is a very effective admixture for concrete, based on modified Sulphonate naphthalene formaldehyde, conforms to IS : 9103 : 1999 and ASTM C 494 Type D.

Hind Plast-N is a lingo Sulphonate based normal plasticiser cum water reducer confirming to IS: 9103-1999 and ASTM C 494 Type A.

Hind Mould Release (OB) Low viscous mineral oil based shutter release agent. Ready for direct application and use.

Hind Mould Release (WT) is a combination of refined emulsified mineral oil . When diluted with water, it produces a chemical release agent. It has the economy of a conventional oil with outstanding properties of a stable release agent.

Hind Cure-AL is a pigmented lacquer type concrete curing compound to prevent premature water loss from concrete. It is based on synthetic film forming resin and leafing grade micro fine Aluminium pigment. The excellent reflection of sunrays from Aluminium surface to dissipate heat is an added advantage. It is a very fast setting compound, the organic solvent helps to from a tough resin film within two hours as per BS 1992 & ASTM C-309-81, ASTM C-156-80, ASTM -97.

Hind Cure-WP is a concrete curing compound to prevent premature water loss from concrete. It is based on micro crystalline Paraffin wax emulsion pigmented with titanium-di- oxide for Superior reflection of Sunrays to dissipate surface heat.

Hind Bond EBA is two component epoxy resin system comprising of Pack-A & Pack-B. It is mainly used to bond new concrete or mortar to old concrete or glazed bricks, tiles, steel or other structural materials to old sound concrete. It contains 100% epoxy and no solvents or dilutants are added into it.

Hind Mould Release - RTU is a new emulsified mineral oil based shutter release agent. Ready for direct application and use.

HIND SILICA - M is a dry Silica fume for use of construction as per mix design of concrete for high strength. The material conforms to IS 15388-2003 and ASTM C - 1240

Hind Crete Plus-WPM is an acrylic polymer based Cementitious coating and when used as recommended, combines with cement and fine sand to from an impermeable coating by blocking the capillaries and pores of the substrate of concrete. It is additionally UV rays resistant.

A milky synthetic latex emulsion which imparts bonding and waterproofing properties to cementations mixes.

Hind Anti Rust is a modified acrylic polymer based cementitous, anticorrosive, protective coating.

Hind ERS- WS is a two-component system for waterproofing. The two parts are to be mixed thoroughly together and then diluted with water, before application.

A two component zinc rich primer consisting polymer resin and hardner.

A single component highly flexible, non toxic elastomeric coating for structural waterproofing.

Hind Hydro Proof range of waterproofing membranes are an elasto-plastomeric [APP-Atectic Poly Propylene] modified bitumen membrane having a dimensionally stable non-woven polyester / fiberglass carrier to obtain excellent waterproofing, heat resistant & cold temperature flexibility, high tensile strength, tear, puncture & UV resistance.

Hind Plast EGA is an Expanding Grout Admixture for pressure injection grouting. of cement milk into concrete.

High Strength, Free Flowing Non Shrink, Non-metallic and Chloride Free Grout.

Ultra High Strength, Free Flowing Non Shrink, and Chloride Free Grout.

Hind HSMC is a ready to use repair morter in powder form micro concrete mix to be added with water and coarse aggregate to obtain a free flow non shrink high strength repair concrete.

A modified ligno-sulphonate based plasticiser for concrete mortar and shotcrete mixes, conforming to IS: 2645-& IS: 9103.

Accelerating Admixture and waterproofing agent for dry/wet Shotcreting.

Hind Shot Set L is Accelerating Admixture and waterproofing agent for wet shotcrete.

Hind Set-PAF is a quicksetting as well as waterproofing agent available in Powder form in ready to use state for use in Dry Spray/Gunite mixes of mortar or concrete.

Hind Set-LAF is a quicksetting as well as water proofing agent available in Liquid form for use in Wet Shotcreting /Guniting.

Hind Bolt-C is a cement composite capsule.

A high and fast strength giving sausage shaped composite cartridge, containing special grade of isophthalic polyester resin and a floating inner tube, filled with catalyst in accurately measured quantities. The two components are housed in a single pouch and yet isolated from each other. When punctured and torqued by a reinforcing rod, the fragile tube breaks, the resin and catalyst thus get homogeneously mixed and the phenomenon of curing by cross linking sets in. The gel point under exothermic conditions is reached with in 1 to 30 minutes, as per specific requirements and the annular space between the bore hole wall and rock bolt is filled with a tough thermoset resin matrix. This stitches the mother substrate or anchors the bolt and stabilizes the support system permanently, achieving a pull-out load as high as 20 MT.

A graded metallic formulation that homogeneously gels with cement to form extra tough concrete floors.

Hind Emetop-NM is a factory processed and specially graded non-oxidising, non-magnetic, non-metallic and chemically inert mineral aggregate floor topping free from oil and grease.

Hind Emetop-RTU is a ready-to-use factory processed and specially graded non-oxidising, non-magnetic, non-metallic and mineral aggregate dry shake surface hardener free from oil and grease.

Hind Coat - FC is a Solvent less high build epoxy resin coating which provides long term protection to concrete and mild steel substrates against chemical corrosion. It has high resistance to abrasion and makes the floor surface dust free. The cured surface is hard, smooth and gives a glazed tile like finish. It is joint less and will not support bacterial growth. It has excellent resistance to abrasion and is easily cleaned and sterilized.

HIND COAT PRIME is a two component epoxy resin based primer suitable for priming on concrete / steel surfaces.

Three component epoxy resin and amine curing system decorative, chemical resistant, dust proof floor and wall coating.

Three component epoxy resin and amine curing system decorative, chemical resistant, dust proof floor and wall coating.

Hind Selfloor 1000 is a pre weighted three component flooring system consisting of pigmented specially graded aggregates with epoxy resin binder. After application it provides a very smooth dust proof, chemical resistant surface.

Hind Sealant-PS is two-component system. After mixing two components, the mixed material provides a strong and highly elastic sealant through cross-linking process. It is available in two grades. Gun grade or non-sag-type is applied for vertical and inclined expansion contraction joints & pouring type for horizontal joints.

Hind Sealant-E is a two component epoxy sealant comprising resin and hardner and premixed special filler. The components are pre measured and fully mixed at a time and consumed.

Hind Fix-TA is ready mix cement based excellent tile adhesive.

HIND ERS-21 is a two component solvent free low viscous fast curing epoxies resin system comprising of component A (Resin) and component B (curing agent). It is designed specially for pressure injection into concrete for carrying structural repairs. HIND ERS-21 is supplied in pre-measured quantities.

HIND ERS-21 P is a two component solvent free low viscous epoxy primer comprising of component A (Resin) and component B (curing agent). It is designed specially as a primer for bonding of all types of epoxy to the substrate. HIND ERS-21 P is supplied in pre-measured quantities.

Hind ERS- 212 is a three component solvent free, free flowing, non-shrinking fast curing epoxy resin system used for pourable into concrete for carrying out structural repairs. The system is insensitive to water and due to higher density it displaces the water thus making application on damp surface. The cured system possesses high mechanical strength, non-shrinking properties, excellent adhesion, and is chemical resistant typical of all epoxy resin system. Cracks and voids of any nature can be successfully sealed/ bonded with Hind ERS-212. Though it has high strength, the cured material does not become brittle and remains slight flexible. Hind ERS-212 is manufactured in pre-measured quantities. Component A- Resin, Component B-Polyamide hardener and Component C- Special Aggregate (Graded Silica flour/sand).

Hind ERS- 219 is a three component solvent free, free flowing, non-shrinking fast curing epoxy resin system which can be poured, in/on concrete, steel plate for carrying out structural repair, grouting of heavy foundation bolt, pocket grouting, padding/heavy duty support for crane, rail and other heavy machineries. The system is insensitive to water and due to higher density it displaces the water thus making application on damp surface. The cured resin system possesses high mechanical strength, non-shrinking properties, excellent adhesion, and is chemical resistant typical of all epoxy resin system. Cracks and voids can be successfully sealed/ bonded with Hind ERS-219. Though it has high strength, the cured material does not become brittle and remains slight flexible. Hind ERS-219 is manufactured in pre-measured quantities. Component A- Resin, Component B-Polyamide hardener and Component C- Special Aggregate (Graded Silica flour/sand).

HIND ERS- 2115 are 3 component solvent free, fast curing epoxy resin system, which filled into concrete voids/pockets for carrying out structural repairs. The system is insensitive to the presence of moisture, thus allowing application on damp concrete surfaces. The cured resin possesses high mechanical strength, excellent adhesion, non-shrinking properties and a chemical resistance typical of all epoxy resin. Cracks and voids can be successfully sealed by Hind ERS mortars. Although HIND ERS mortars are supplied in pre-measured quantities according to the mixing proportion component-A Resin, component B-Polyamide Hardener and Component-C Special Aggregate (Graded Silica Sand).

HIND ERA-31 is a solvent-free, thixotropic, two component adhesive and repair mortar based on a combination of epoxy resins and specially selected filler. Its pasty consistency, allows an easy and versatile application.

Four component epoxy resin and amine curing system decorative, chemical resistant, dust proof grout and mortar.

HIND ERS-21(LV) is a two component solvent free low viscous fast curing epoxies resin system comprising of component A and component B. It is designed specially for pressure injection into concrete for carrying structural repairs. HIND ERS-21(LV) is supplied in pre-measured quantities. The material conforms to ASTM:C-881-1987 Type 1, Grade 1,Class (B+C).